While the boat was upside down, trailer bunk "splashes" were taken using the hull for a mold. The first step was to cover the hull with plastic so that nothing would stick to the hull. Next came a layer of peel ply followed by 3 layers of heavy glass roving
 |
| Half inch high density foam was glued over the glass |
 |
| The outer edges of the foam were rounded and a fillet was added next to the glass |
 |
| Three more layers of heavy glass roving are glued over the foam |
 |
| A pattern for the plywood portion of the bunk |
 |
| Starboard aft bunk with plywood glued on and a fillet added |
 |
| Forward trailer bunk lifted off the hull |
No comments:
Post a Comment