 |
| All deck hardware is mounted on 1/8" G-10 Garolite plates above and below the deck. G-10 is a glass-based phenolic that is strong, stiff, and has high impact and compressive strength. In this photo, the light green plate under the black organizer is G-10 Garolite. |
 |
| The running backstays come forward through a tube to a turning block, then into a clutch and then on to a winch.The turning block and the clutch are mounted on a plywood plinth to insure the correct angles to feed into the winch. |
 |
| The plywood plinth is glued to the deck in the proper position. |
 |
| The plywood plinth is covered with two layers of carbon cloth, one layer of glass cloth then vacuum bagged. |
 |
| Ready for fairing |
No comments:
Post a Comment